Written Clearfreak.com Installation Instructions

1.. Make sure your phone, ipod, or computer is turned off and clean.  fingerprint free as well

2.. get a household towel or rag that is very absorbent, not one that just pushes off moisture

3.. Get a small bottle of luke warm water and set it to a very very fine mist setting

4.. pull off one piece at a time (smaller pieces first)

USE WET FINGER TIPS TO HANDLE THE ADHESIVE SIDE OF THE FILM,

DO NOT TOUCH the adhesive side AS IT WILL LEAVE MARKS

5.. gently spray both sides of the film piece with water and shake off any excess

6.. place the film on the item and align it with any buttons or cut-outs first

7.. take your squeegee and gently squeegee the film from the middle out & any cut out areas

8.. fully wipe off all excess water with your towel

9.. let dry - material will look a bit rough initially but once dry it will clear up


** VERY IMPORTANT **

CLEARFREAK KITS WILL NOT LOOK PERFECT IMMEDIATELY FOLLOWING INSTALLATION.  THEY NEED TIME TO DRY OUT, SET, OR “CURE” IN ORDER TO LOOK VIRTUALLY INVISIBLE.




REMOVAL OF CLEARFREAK PROTECTIVE KITS

1.. TAKE A REGULAR HOME HAIR DRYER AND GENTLY WARM UP THE CLEARFREAK PROTECTIVE PIECES ON YOUR MOBILE DEVICE, GAME SYSTEM, LAPTOP, OR IPOD.

2.. DO NOT GET ITEMS SO HOT THAT THEY ARE HARD TO TOUCH OR HANDLE.  YOU JUST NEED TO GET THEM VERY WARM TO THE TOUCH.

3.. GENTLY PULL OF SLOWLY EACH PIECE

4.. IF THERE IS ANY RESIDUE LEFT BEHIND (SHOULDN’T BE) JUST USE A GENERIC HOUSEHOLD CLEANER AND NON ABRASIVE CLOTH TO CLEAN UP.

Installation Disclaimer: ClearFreak.com makes every effort to assure that all precut protection kits have been test fit or otherwise checked for fit and suitability for the specific make and model advertised. Clearfreak.com’s liability is limited to providing installation instructions and advice via our website

Clearfreak.com is not responsible for misused or incorrectly installed protection kits.  We strive to give our customers the best possible instructions to correctly install our products.

PLEASE DO NOT THROW AWAY YOUR PROTECTOR IF YOU ARE UNABLE TO INSTALL IT CORRECTLY!!!  CONTACT CLEARFREAK.COM IMMEDIATELY FOR ASSISTANCE VIA PHONE OR EMAIL.